请留言。
*名称不能为空!
请输入产品详情,例如尺寸、颜色、材质等以及其他具体要求,以便获得准确报价。此项不能为空。
Flat Head Self Tapping Screws For Wood Zinc Plated Fine Thread Countersunk For Furniture Assembly
Self Tapping Screws
Products Categories
Featured Products

Flat Head Self Tapping Screws For Wood Zinc Plated Fine Thread Countersunk For Furniture Assembly

Self tapping screws cut their own thread when driven into metal wood or plastic. No pre tapping needed. Flat head for flush mounting. Wafer head low profile wide clamping area. Fine thread for thin metal. Brass for corrosion resistance. Galvanized for outdoor use. Metric sizes M2 to M6. Class 4.8 and 6.8. For electronics wood furniture trailer flooring and general assembly. 

    Self tapping screws are pretty simple. You drive them into a hole and they cut their own thread as they go. No need to tap the hole first. That saves time on the assembly line.

    How They Work

    The tip has cutting edges that dig into the material. The thread grabs the walls of the hole and holds tight. No pre tapped hole needed. Just drill a pilot hole and drive the screw in.

    3.png
    Head Styles

    Flat head screws sit flush with the surface. The head sinks in so you get a smooth finish. Good for finished panels where you don't want screws sticking out.

    Wafer head screws have a low wide head. They don't stick up much but give you good clamping pressure. You see these a lot on pocket holes and sheet metal work.

    Pan head screws are the standard domed head. Works for most general assembly jobs.

    微信图片_20260508150441_55_21.jpg
    Thread Types

    Fine thread screws grip better in thin metal and hard plastic. More threads per inch means harder to pull out.

    Coarse thread screws are for softer stuff like wood and plastic. They bite in faster.

    详情页_01.png
    Materials

    Stainless steel resists rust. Good for outdoor use or wet areas.

    Brass looks good and doesn't rust. Also non magnetic. Works well for electronics and fixtures where appearance matters.

    Galvanized screws have a zinc coating. Decent rust protection for outdoors without spending too much.

    Black oxide gives you a matte black finish. Mainly for indoor use. Cuts down on glare.

    Drive Types

    Phillips drive is the cross shaped one. Most common. Works with standard screwdrivers you already have.

    Allen head has a hex hole inside. You can crank it down tighter without stripping the head.

    Sizes

    Metric sizes from M2 up to M6. Lengths from 6mm to 50mm. Need something different Just ask.

    Where To Use Them

    Electronics cases wood furniture trailer floors plastic boxes sheet metal car interior trim signs and general factory assembly. Basically anywhere you need to put screws in fast without pre tapping.

    详情页_05.jpg
    Quality

    We check threads and hardness on every batch. Class 4.8 and 6.8 strength options. Custom sizes and head styles available if you need something special. Bulk pricing and direct shipping worldwide.

    Welcome to inquire!
    We offer high-quality fasteners with custom solutions and competitive prices. Our team will reply to you within 24 hours.