Hot Products
Custom Sealing Screws from China Suppliers: Industrial Waterproof Fasteners - Quality Factory Manufacturing
What You Can Get (Specs & Custom Options)
Products
- Sizes we work with: Threads from M2 to M20, lengths 5mm–100mm, head styles (pan, round, flat) — and if you need something off-book (weird thread pitch, unique head diameter), send over your drawing; we'll make it.
- Seal gaskets to match your space: Pick NBR (for oil-heavy areas), EPDM (outdoor/wet spots), silicone (high-heat gear), or Viton (chemical-resistant setups) — no generic gaskets here.
- Base materials & finishes: 304/316 stainless steel (won't rust in damp spots), carbon steel (for heavy strength); finishes like zinc plating (extra rust protection) or passivation (tougher against corrosion).
Where These Screws Actually Work
ProductsThese aren't just "sealing screws" — they're for setups where leaks or gunk break things:
01
Hydraulic/pneumatic gear
Seal valve covers or cylinder parts so hydraulic oil stays put (no messy, expensive leaks).
02
Outdoor electrical boxes
Lock junction boxes/sensor housings tight — rain and dust won't fry your equipment.
03
Chemical processing machines
Fasten reactor lids or pipeline flanges — corrosive liquids won't seep out (or in).
04
Medical gear casings
Keep sterile environments sterile — no dust or moisture getting into sensitive instruments.
How We Make Them (And Keep Them Good)
Products
🔧 Our Build Process
-
1Cut raw material, then cold-head to shape the screw (tough, no weak spots).
-
2Roll threads (way more precise than cutting — threads hold tighter).
-
3Press-fit gaskets with machines (no loose seals from hand-fitting).
-
4Add finish (plating/passivation) then check every part.
✅ How We Make Sure They Don't Fail
-
✓Measure every screw (calipers, thread gauges) — no "close enough" sizes.
-
✓Pressure-test seals (up to 10MPa, 24 hours no leaks).
-
✓Salt-spray test (48–120 hours) — if they rust, we scrap 'em.
Quick Tips for Installing (So They Work Right)
Products- Step 1: Wipe the mounting surface clean first (no dirt or oil under the gasket — that kills the seal).
- Step 2: Use a torque wrench (don't crank it too hard — you'll crush the gasket and ruin the seal).
- Step 3: For hot/chemical spots: Check the seal every 6–12 months (swap the gasket if it looks cracked/dry).
Why Pick Us Over Generic Screws?
Products- Your specs, fast: Non-standard designs can be sampled within half a month, without the need to wait for a long time for mold opening.
- No batch surprises: Whether you need 100 or 100,000, every screw's the same quality.
- We help you pick: Not sure which material/gasket? Tell us your setup — we'll point you to what works.
Professional Customization
Products
Frequently Asked Questions
FAQ-
What thread sizes and lengths are available for sealing screws?We manufacture sealing screws from M2 to M20 in thread size, with lengths ranging from 5mm to 100mm. Head styles include pan, round, and flat. If your application requires a non-standard thread pitch or unique head diameter, simply send us your technical drawing and we will produce it to your exact specifications.
-
Which gasket material should I choose for my application?The right gasket depends on your environment. Use NBR for oil-heavy or fuel-contact areas, EPDM for outdoor or wet/humid spots, silicone for high-temperature equipment, and Viton for chemical-resistant setups. If you are unsure, share your application details with us and we will recommend the best option.
-
What quality tests do your sealing screws undergo before shipment?Every batch goes through dimensional inspection using calipers and thread gauges, pressure seal testing at up to 10MPa for 24 hours with zero leakage tolerance, and salt-spray corrosion testing for 48 to 120 hours. Any screw that fails any of these tests is scrapped — not reworked and shipped.
-
How long does it take to get a custom sample?For non-standard or custom designs, we can typically produce and deliver samples within half a month from the date we receive your confirmed drawing. There is no need for lengthy mold-opening lead times for most custom specifications.
-
What is the minimum and maximum order quantity?We accommodate both small and large orders. Whether you need 100 pieces for a prototype run or 100,000 pieces for full-scale production, every screw is manufactured to the same quality standard with no compromise on consistency between batches.
-
How should I maintain sealing screws in high-temperature or chemical environments?For equipment operating in high-temperature or chemically aggressive environments, we recommend inspecting the gasket seal every 6 to 12 months. If the gasket shows signs of cracking, hardening, or drying out, replace it promptly to maintain a reliable seal and prevent leakage or contamination.